PartsTable
Technical Data Sheet

G-3/6 — Technical Data Sheet

✓ Verified by PartsTable
TP-Link · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

<b>What This Product Does</b><br><br>The G36 is a Gigabit Ethernet router with advanced security features to ensure your network situation. It comes with a Dual-core ARM® Cortex-A53 processor and 512MB DDR4 high-speed memory for outstanding performance.<br><br><b>Up to Five WAN Gigabit Ports to Optimize Bandwidth Usage</b><br><br>One gigabit SFP WAN/LAN port, one gigabit RJ45 WAN port, and four freely interchangeable WAN/LAN ports allow the router to support up to five WAN ports to satisfy various internet access requirements through one device. The multi-WAN Load Balancing function distributes data streams according to the bandwidth proportion of every WAN port to raise the utilization rate of multi-line broadband.<br><br><b>Highly Secure VPN</b><br><br>G36 supports multiple VPN protocols including SSL/ Wireguard/ OpenVPN/ GRE VPN§/ IPSec/ PPTP/ L2TP/ L2TP over IPSec, helping users to establish VPN connections more flexibly.△ One-click auto IPSec VPN greatly simplifies VPN configurat This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3413, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
G-3/6
NSN: 5315-00-010-3413
FSC: 5315
CAGE: 42247 — NABORS TRAILERS INC SUB OF STEEGO CORP (USA)
SPECIFICATIONS
colorRED LENS
diameter0.188 INCHES NOMINAL IN
materialGLASS LENS
head_typeSTRAIGHT
bore_shapeSTRAIGHT
derivationNATURAL SOURCES
thread_class2A A
bore_diameter0.2362 INCHES NOMINAL IN
overall_width0.2360 INCHES NOMINAL IN
physical_formGRANULAR
thread_seriesUNS
inclosure_typeFULLY INCLOSED
NSN5315-00-010-3413
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: G-3/6 · TP-Link ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL OVERALL
DIAMETER: 0.188 INCHES NOMINAL IN
UNDERLOOP LENGTH: 2.500 INCHES NOMINAL IN
STYLE DESIGNATOR: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
DIAMETER0.188 INCHES NOMINAL IN
UNDERLOOP LENGTH2.500 INCHES NOMINAL IN
STYLE DESIGNATORSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
3-8X3-8Interchangeable
interchangeable cross-reference
interchangeable
QQA268Interchangeable
interchangeable cross-reference
interchangeable
2620Interchangeable
interchangeable cross-reference
interchangeable
20646DInterchangeable
interchangeable cross-reference
interchangeable
34GInterchangeable
interchangeable cross-reference
interchangeable
F67EInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G-3/6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G-3/6?
G-3/6 is a SEMICONDUCTOR DEVICE SET manufactured by TP-Link.
What parts can replace G-3/6?
There are 20 known substitutes for G-3/6: 3-8X3-8, QQA268, 2620 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G-3/6?
G-3/6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3413. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G-3/6