PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G-228-3/8X6
G-228-3/8X6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The G-228-3/8X6 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-188-0330, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G-228-3/8X6
NSN: 5340-00-188-0330
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part NumberG-228-3/8X6
NSN5340-00-188-0330
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G-228-3/8X6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
END STYLE: CLEVIS AND CLEVIS
•
MATERIAL: STEEL OVERALL
•
BODY LENGTH: 7.125 INCHES NOMINAL IN
•
LOCKING DEVICE TYPE: NUT
•
NONDEFINITIVE SPEC/STD DATA: 7 CLASS AND 1 FORM AND 1 TYPE
•
NOMINAL THREAD SIZE: 0.375 INCHES BODY IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC) BODY
•
TAKE-UP DISTANCE: 6.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
END STYLECLEVIS AND CLEVIS
MATERIALSTEEL OVERALL
BODY LENGTH7.125 INCHES NOMINAL IN
LOCKING DEVICE TYPENUT
NONDEFINITIVE SPEC/STD DATA7 CLASS AND 1 FORM AND 1 TYPE
NOMINAL THREAD SIZE0.375 INCHES BODY IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC) BODY
TAKE-UP DISTANCE6.000 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
FORK WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
ASTM F 1145-5Upgraded Successor
successor cross-reference
successor
FF-T-791Upgraded Successor
successor cross-reference
successor
11157-1-64Upgraded Successor
successor cross-reference
successor
ASTM-F1145-I1B 1/2X9Upgraded Successor
successor cross-reference
successor
S-2510-1/2X9Upgraded Successor
successor cross-reference
successor
MS27954-5Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy G-228-3/8X6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G-228-3/8X6?
G-228-3/8X6 is a G-228-3/8X6.
What parts can replace G-228-3/8X6?
There are 18 known substitutes for G-228-3/8X6: ASTM F 1145-5, FF-T-791, 11157-1-64 and 15 more. Substitute compatibility should be verified for your specific system.
Is G-228-3/8X6 still available?
G-228-3/8X6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G-228-3/8X6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026