PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G-226
G-226 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GAGE,CRIMPING TOOL is a the manufacturer industrial component. Key specifications include phase: THREE INPUT, length: 15.000 INCHES NOMINAL IN, material: STEEL COMP 1035 OVERALL, end_style: CLOSED EYE AND CLOSED EYE, eye_width: 0.875 INCHES NOMINAL IN, body_style: HEX OPEN BODY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-294-0952, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G-226
NSN: 5340-00-294-0952
FSC: 5340
CAGE: 75535 — THE CROSBY GROUP LLC DBA THE CROSBY GROUP (USA)
SPECIFICATIONS
phaseTHREE INPUT
length15.000 INCHES NOMINAL IN
materialSTEEL COMP 1035 OVERALL
end_styleCLOSED EYE AND CLOSED EYE
eye_width0.875 INCHES NOMINAL IN
body_styleHEX OPEN BODY
power_rating25.000 HORSEPOWER OUTPUT
thread_class1B BODY
cooling_methodFAN COOLED
special_featuresMEETS OR EXCEEDS NEMA MG1 LATEST REVISION FOR ENERGY EFFICIENT GENERAL PURPOSE DUTY
take-up_distance6.000 INCHES NOMINAL IN
enclosure_featureOPEN AND DRIPPROOF-45 DEG
NSN5340-00-294-0952
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G-226 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: I TEMPER AND 1 FORM AND 4 CLASS
•
BODY STYLE: HEX OPEN BODY
•
NOMINAL THREAD SIZE: 0.500 INCHES BODY IN
•
EYE WIDTH: 0.719 INCHES NOMINAL IN
•
TAKE-UP DISTANCE: 6.000 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC) BODY
•
SURFACE TREATMENT: ZINC OVERALL
•
END STYLE: CLOSED EYE AND CLOSED EYE
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAI TEMPER AND 1 FORM AND 4 CLASS
BODY STYLEHEX OPEN BODY
NOMINAL THREAD SIZE0.500 INCHES BODY IN
EYE WIDTH0.719 INCHES NOMINAL IN
TAKE-UP DISTANCE6.000 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC) BODY
SURFACE TREATMENTZINC OVERALL
END STYLECLOSED EYE AND CLOSED EYE
THREAD CLASS1B BODY
LENGTH13.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
ASTM F 1145-5Upgraded Successor
successor cross-reference
successor
FF-T-791Upgraded Successor
successor cross-reference
successor
11157-1-64Upgraded Successor
successor cross-reference
successor
ASTM-F1145-I1B 1/2X9Upgraded Successor
successor cross-reference
successor
S-2510-1/2X9Upgraded Successor
successor cross-reference
successor
MS27954-5Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G-226?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G-226?
G-226 is a GAGE,CRIMPING TOOL.
What parts can replace G-226?
There are 17 known substitutes for G-226: ASTM F 1145-5, FF-T-791, 11157-1-64 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G-226?
G-226 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-294-0952. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G-226

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026