PartsTable
Technical Data Sheet
Download PDF

FXGEN0030 — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FXGEN0030: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 7.000 INCHES NOMINAL IN, flange_width: 4.500 INCHES NOMINAL IN, flange_length: 8.000 INCHES NOMINAL IN, inside_diameter: 2.250 INCHES NOMINAL IN, flange_thickness: 0.250 INCHES NOMINAL IN, style_designator: RECTANGULAR W/FLANGED BUSHING TWO-HOLE FLANGE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-536-0493, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FXGEN0030
NSN: 5340-01-536-0493
FSC: 5340 — Hardware, Commercial
CAGE: 62657 — INTERGRAPH CORPORATION DBA INTERGRAPH CORP (USA)
SPECIFICATIONS
height7.000 INCHES NOMINAL IN
flange_width4.500 INCHES NOMINAL IN
flange_length8.000 INCHES NOMINAL IN
inside_diameter2.250 INCHES NOMINAL IN
flange_thickness0.250 INCHES NOMINAL IN
style_designatorRECTANGULAR W/FLANGED BUSHING TWO-HOLE FLANGE
end_item_identificationNETWORK SWITCH RACK
flange_mounting_hole_diameter0.281 INCHES NOMINAL IN
distance_between_mounting_hole_centers3.500 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencySHOCK MOUNT
NSN5340-01-536-0493
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FXGEN0030 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE MOUNTING HOLE DIAMETER: 0.281 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 3.500 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR W/FLANGED BUSHING TWO-HOLE FLANGE
•
FLANGE LENGTH: 8.000 INCHES NOMINAL IN
•
INSIDE DIAMETER: 2.250 INCHES NOMINAL IN
•
HEIGHT: 7.000 INCHES NOMINAL IN
•
FLANGE WIDTH: 4.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE MOUNTING HOLE DIAMETER0.281 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS3.500 INCHES NOMINAL IN
FLANGE THICKNESS0.250 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR W/FLANGED BUSHING TWO-HOLE FLANGE
FLANGE LENGTH8.000 INCHES NOMINAL IN
INSIDE DIAMETER2.250 INCHES NOMINAL IN
HEIGHT7.000 INCHES NOMINAL IN
FLANGE WIDTH4.500 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSHOCK MOUNT
END ITEM IDENTIFICATIONNETWORK SWITCH RACK
SUBSTITUTES & CROSS-REFERENCES 1
400-8214469 ITEM 18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FXGEN0030?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FXGEN0030?
FXGEN0030 is a MOUNT,RESILIENT,UTILITY.
What parts can replace FXGEN0030?
There is 1 known substitute for FXGEN0030: 400-8214469 ITEM 18. Substitute compatibility should be verified for your specific system.
What is the NSN for FXGEN0030?
FXGEN0030 is cataloged in the U.S. Government catalog under NSN 5340-01-536-0493. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FXGEN0030

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.