PartsTable
Technical Data Sheet
Download PDF

FWM05187 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FWM05187: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL OVERALL, center_hole_diameter: 5.202 INCHES MINIMUM AND 5.248 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, cross-sectional_shape_style: O-RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-348-4380, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FWM05187
NSN: 5330-00-348-4380
FSC: 5330 — Packing and Gasket Materials
CAGE: D8348 — KUKA WEHRTECHNIK GMBH (DEU)
SPECIFICATIONS
materialRUBBER OVERALL
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL OVERALL
center_hole_diameter5.202 INCHES MINIMUM AND 5.248 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
NSN5330-00-348-4380
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FWM05187 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
CENTER HOLE DIAMETER: 5.202 INCHES MINIMUM AND 5.248 INCHES MAXIMUM IN
•
MATERIAL: RUBBER OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL OVERALL
CROSS-SECTIONAL SHAPE STYLEO-RING
CENTER HOLE DIAMETER5.202 INCHES MINIMUM AND 5.248 INCHES MAXIMUM IN
MATERIALRUBBER OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
05187Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-355N219-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy FWM05187?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FWM05187?
FWM05187 is a PACKING,PREFORMED.
What parts can replace FWM05187?
There are 2 known substitutes for FWM05187: 05187, 2-355N219-7. Substitute compatibility should be verified for your specific system.
What is the NSN for FWM05187?
FWM05187 is cataloged in the U.S. Government catalog under NSN 5330-00-348-4380. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FWM05187