PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FWC752B-200S PC 32
FWC752B-200S PC 32 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include width: 8.500 INCHES NOMINAL IN, length: 11.000 INCHES NOMINAL IN, radius: 1.125 INCHES NOMINAL IN, material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE, thickness: 0.250 INCHES NOMINAL IN, top_style: FLAT WITH RIGHT EDGE BEVELED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-290-6000, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FWC752B-200S PC 32
NSN: 3110-01-290-6000
FSC: 3110
CAGE: 71041 — ALTRA INDUSTRIAL MOTION CORP. (USA)
SPECIFICATIONS
width8.500 INCHES NOMINAL IN
length11.000 INCHES NOMINAL IN
radius1.125 INCHES NOMINAL IN
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
thickness0.250 INCHES NOMINAL IN
top_styleFLAT WITH RIGHT EDGE BEVELED
body_styleRECTANGULAR COMMUTATOR
usage_formSHEET
design_typeLIMITED
temp_rating-40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
body_diameter4.77 INCHES NOMINAL IN
exterior_colorBLACK
NSN3110-01-290-6000
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FWC752B-200S PC 32 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
27070Interchangeable
interchangeable cross-reference
interchangeable
6739Interchangeable
interchangeable cross-reference
interchangeable
27024Interchangeable
interchangeable cross-reference
interchangeable
8-9732-4386-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FWC752B-200S PC 32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FWC752B-200S PC 32?
FWC752B-200S PC 32 is a CUP,TAPERED ROLLER BEARING.
What parts can replace FWC752B-200S PC 32?
There are 4 known substitutes for FWC752B-200S PC 32: 27070, 6739, 27024 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FWC752B-200S PC 32?
FWC752B-200S PC 32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-290-6000. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FWC752B-200S PC 32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026