PartsTable
Technical Data Sheet
Download PDF

FW6010L-6-B — NUT,SELF-LOCKING,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

FW6010L-6-B: NUT,SELF-LOCKING,CLINCH.

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1050 BRACKET, nut_style: SPLINE (FLOATING), nut_height: 0.322 INCHES NOMINAL IN, nut_length: 0.420 INCHES NOMINAL IN, pilot_length: 0.130 INCHES NOMINAL IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-631-8595, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FW6010L-6-B
NSN: 5310-01-631-8595
FSC: 5310 — Nuts and Washers
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 BRACKET
nut_styleSPLINE (FLOATING)
nut_height0.322 INCHES NOMINAL IN
nut_length0.420 INCHES NOMINAL IN
pilot_length0.130 INCHES NOMINAL IN
thread_class3B
thread_seriesUNJC
pilot_diameter0.217 INCHES MAXIMUM IN
locking_featureFREE-RUNNING ALL METAL DESIGN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.280 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
NSN5310-01-631-8595
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FW6010L-6-B · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.280 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
NUT LENGTH: 0.420 INCHES NOMINAL IN
•
THREAD SERIES: UNJC
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
PILOT DIAMETER: 0.217 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.130 INCHES NOMINAL IN
•
LOCKING FEATURE: FREE-RUNNING ALL METAL DESIGN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.280 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
NUT LENGTH0.420 INCHES NOMINAL IN
THREAD SERIESUNJC
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
PILOT DIAMETER0.217 INCHES MAXIMUM IN
PILOT LENGTH0.130 INCHES NOMINAL IN
LOCKING FEATUREFREE-RUNNING ALL METAL DESIGN
NUT HEIGHT0.322 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
582R196G20Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FW6010L-6-B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FW6010L-6-B?
FW6010L-6-B is a NUT,SELF-LOCKING,CLINCH.
What parts can replace FW6010L-6-B?
There is 1 known substitute for FW6010L-6-B: 582R196G20. Substitute compatibility should be verified for your specific system.
What is the NSN for FW6010L-6-B?
FW6010L-6-B is cataloged in the U.S. Government catalog under NSN 5310-01-631-8595. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FW6010L-6-B