PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FW1507
FW1507 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, groove_width: 0.062 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 0.500 INCHES NOMINAL IN, overall_height: 0.125 INCHES NOMINAL IN, flange_thickness: 0.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-262-5944, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FW1507
NSN: 5325-00-262-5944
FSC: 5325
CAGE: 28835 — HOBART BROS CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
groove_width0.062 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.500 INCHES NOMINAL IN
overall_height0.125 INCHES NOMINAL IN
flange_thickness0.094 INCHES NOMINAL IN
groove_outside_diameter0.750 INCHES NOMINAL IN
grommet_construction_typeSOLID
nonmetallic_hardness_rating65.0 MINIMUM SHORE DUROMETER A AND 75.0 MAXIMUM SHORE DUROMETER A
large_flange_outside_diameter0.875 INCHES NOMINAL IN
material_document_and_classificationASTM ES705 81346 ASSN STD SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN5325-00-262-5944
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FW1507 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROOVE OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
LARGE FLANGE OUTSIDE DIAMETER: 0.875 INCHES NOMINAL IN
•
NONMETALLIC HARDNESS RATING: 65.0 MINIMUM SHORE DUROMETER A AND 75.0 MAXIMUM SHORE DUROMETER A
•
GROMMET STYLE: ROUND
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
FLANGE THICKNESS: 0.094 INCHES NOMINAL IN
•
GROOVE WIDTH: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
GROOVE OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
LARGE FLANGE OUTSIDE DIAMETER0.875 INCHES NOMINAL IN
NONMETALLIC HARDNESS RATING65.0 MINIMUM SHORE DUROMETER A AND 75.0 MAXIMUM SHORE DUROMETER A
OVERALL HEIGHT0.125 INCHES NOMINAL IN
GROMMET STYLEROUND
MATERIALRUBBER SYNTHETIC OVERALL
FLANGE THICKNESS0.094 INCHES NOMINAL IN
GROOVE WIDTH0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM ES705 81346 ASSN STD SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
HOLE DIAMETER0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
1442Interchangeable
interchangeable cross-reference
interchangeable
G-1068Interchangeable
interchangeable cross-reference
interchangeable
48-058961-02Interchangeable
interchangeable cross-reference
interchangeable
W10312-6Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FW1507?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FW1507?
FW1507 is a GROMMET,NONMETALLIC.
What parts can replace FW1507?
There are 4 known substitutes for FW1507: 1442, G-1068, 48-058961-02 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FW1507?
FW1507 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-262-5944. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FW1507

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026