PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FV 1030330
FV 1030330 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL, alignment_type: RIGID, special_features: OIL HOLE AND GROOVE IN INNER RING, surface_treatment: CADMIUM EXPOSED SURFACES AS MOUNTED, lubrication_material: GREASE, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2980, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FV 1030330
NSN: 3110-00-227-2980
FSC: 3110
CAGE: K0654 — SAFRAN LANDING SYSTEMS UK LTD DIV SAFRAN LANDING SYSTEMS UK (GBR)
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
alignment_typeRIGID
special_featuresOIL HOLE AND GROOVE IN INNER RING
surface_treatmentCADMIUM EXPOSED SURFACES AS MOUNTED
lubrication_materialGREASE
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
lubrication_material_document_and_classificationMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-227-2980
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FV 1030330 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
MATERIAL: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
•
SURFACE TREATMENT: CHROMIUM OUTER RING OUTSIDE DIAMETER
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
SPECIAL FEATURESOIL HOLE AND GROOVE IN INNER RING
ALIGNMENT TYPERIGID
MATERIALSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
SURFACE TREATMENTCHROMIUM OUTER RING OUTSIDE DIAMETER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM EXPOSED SURFACES AS MOUNTED
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
MS24466-14Interchangeable
interchangeable cross-reference
interchangeable
24466-14Interchangeable
interchangeable cross-reference
interchangeable
14NBL3234YJInterchangeable
interchangeable cross-reference
interchangeable
6NBL1618YJInterchangeable
interchangeable cross-reference
interchangeable
24466-6Interchangeable
interchangeable cross-reference
interchangeable
BACB10B137Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FV 1030330?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FV 1030330?
FV 1030330 is a BEARING,ROLLER,NEEDLE.
What parts can replace FV 1030330?
There are 20 known substitutes for FV 1030330: MS24466-14, 24466-14, 14NBL3234YJ and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FV 1030330?
FV 1030330 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2980. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FV 1030330

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026