PartsTable
Technical Data Sheet
Download PDF

FTV7006-8 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FTV7006-8: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include thread_class: 3A A, head_diameter: 0.348 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, special_features: WASHER .635 TO .655 IN. DIA IN, countersink_angle: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-354-5501, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FTV7006-8
NSN: 5305-01-354-5501
FSC: 5305 — Screws
CAGE: 58998 — FASTENER INNOVATION TECHNOLOGY, INC. DBA F I T (USA)
SPECIFICATIONS
thread_class3A A
head_diameter0.348 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
special_featuresWASHER .635 TO .655 IN. DIA IN
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
features_providedWASHER
internal_drive_styleTORQUE SET
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5305-01-354-5501
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FTV7006-8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
FEATURES PROVIDED: WASHER
•
SCREW MATERIAL: STEEL
•
INTERNAL DRIVE STYLE: TORQUE SET
•
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
FEATURES PROVIDEDWASHER
SCREW MATERIALSTEEL
SPECIAL FEATURESWASHER .635 TO .655 IN. DIA IN
INTERNAL DRIVE STYLETORQUE SET
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
THREAD CLASS3A A
THREAD QUANTITY PER INCH32
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy FTV7006-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FTV7006-8?
FTV7006-8 is a SCREW,MACHINE.
What is the NSN for FTV7006-8?
FTV7006-8 is cataloged in the U.S. Government catalog under NSN 5305-01-354-5501. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FTV7006-8