PartsTable
Technical Data Sheet
Download PDF

FTSRC-3-1-1-1.00-SC — RETAINER,SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FTSRC-3-1-1-1.00-SC: RETAINER,SEAL.

The RETAINER,SEAL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, construction: ONE-PIECE, special_features: 1.000 BARREL GRIP, style_designator: FLANGED, aperture_diameter: 0.188 INCHES NOMINAL IN, body_outside_diameter: 0.680 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-535-4785, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FTSRC-3-1-1-1.00-SC
NSN: 5330-01-535-4785
FSC: 5330 — Packing and Gasket Materials
CAGE: 51439 — FATIGUE TECHNOLOGY, INC (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
constructionONE-PIECE
special_features1.000 BARREL GRIP
style_designatorFLANGED
aperture_diameter0.188 INCHES NOMINAL IN
body_outside_diameter0.680 INCHES MAXIMUM IN
end_item_identificationB-1B AIRCRAFT
NSN5330-01-535-4785
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FTSRC-3-1-1-1.00-SC MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 0.680 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLANGED
•
APERTURE DIAMETER: 0.188 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 630 OVERALL
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
BODY OUTSIDE DIAMETER0.680 INCHES MAXIMUM IN
STYLE DESIGNATORFLANGED
APERTURE DIAMETER0.188 INCHES NOMINAL IN
SPECIAL FEATURES1.000 BARREL GRIP
END ITEM IDENTIFICATIONB-1B AIRCRAFT
MATERIALSTEEL COMP 630 OVERALL
CONSTRUCTIONONE-PIECE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
FTSRC-3-1-1-1.000-SReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FTSRC-3-1-1-1.00-SC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FTSRC-3-1-1-1.00-SC?
FTSRC-3-1-1-1.00-SC is a RETAINER,SEAL.
What parts can replace FTSRC-3-1-1-1.00-SC?
There is 1 known substitute for FTSRC-3-1-1-1.00-SC: FTSRC-3-1-1-1.000-S. Substitute compatibility should be verified for your specific system.
What is the NSN for FTSRC-3-1-1-1.00-SC?
FTSRC-3-1-1-1.00-SC is cataloged in the U.S. Government catalog under NSN 5330-01-535-4785. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FTSRC-3-1-1-1.00-SC