PartsTable
Technical Data Sheet
Download PDF

FTR-04-0-2-18-T — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FTR-04-0-2-18-T: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include overall_height: 0.349 INCHES NOMINAL IN, special_features: RETAINER MATERIAL TITANIUM 6AL-4V,ANNEALED. CLIP CRES 17-7 PER AMS5678.FASTENER DIAMETER 0.225 INCHES.

V, style_designator: CLIP, material_thickness: 0.055 INCHES NOMINAL IN, end_item_identification: F/A-22 RAPTOR, part_name_assigned_by_controlling_agency: RETAINER. This part is cataloged in the U.S. Government catalog under NSN 5340-01-531-5053, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FTR-04-0-2-18-T
NSN: 5340-01-531-5053
FSC: 5340 — Hardware, Commercial
CAGE: 51439 — FATIGUE TECHNOLOGY, INC (USA)
SPECIFICATIONS
overall_height0.349 INCHES NOMINAL IN
special_featuresRETAINER MATERIAL TITANIUM 6AL-4V,ANNEALED. CLIP CRES 17-7 PER AMS5678.FASTENER DIAMETER 0.225 INCHES. V
style_designatorCLIP
material_thickness0.055 INCHES NOMINAL IN
end_item_identificationF/A-22 RAPTOR
part_name_assigned_by_controlling_agencyRETAINER
NSN5340-01-531-5053
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FTR-04-0-2-18-T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CLIP
•
MATERIAL THICKNESS: 0.055 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.349 INCHES NOMINAL IN
STYLE DESIGNATORCLIP
MATERIAL THICKNESS0.055 INCHES NOMINAL IN
SPECIAL FEATURESRETAINER MATERIAL TITANIUM 6AL-4V,ANNEALED. CLIP CRES 17-7 PER AMS5678.FASTENER DIAMETER 0.225 INCHES. V
PART NAME ASSIGNED BY CONTROLLING AGENCYRETAINER
END ITEM IDENTIFICATIONF/A-22 RAPTOR
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5PTV7002B4L18VSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy FTR-04-0-2-18-T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FTR-04-0-2-18-T?
FTR-04-0-2-18-T is a RETAINER,NUT AND BOLT.
What parts can replace FTR-04-0-2-18-T?
There is 1 known substitute for FTR-04-0-2-18-T: 5PTV7002B4L18V. Substitute compatibility should be verified for your specific system.
What is the NSN for FTR-04-0-2-18-T?
FTR-04-0-2-18-T is cataloged in the U.S. Government catalog under NSN 5340-01-531-5053. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FTR-04-0-2-18-T