PartsTable
Technical Data Sheet
Download PDF

FTM 7008-6 — WASHER,KEY

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

FTM 7008-6: WASHER,KEY.

The WASHER,KEY is a the manufacturer industrial component. Key specifications include material: STEEL COMP 631 OVERALL, hole_diameter: 0.141 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN, outside_diameter: 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, style_designator: KEY, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-332-6514, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FTM 7008-6
NSN: 5310-01-332-6514
FSC: 5310 — Nuts and Washers
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 631 OVERALL
hole_diameter0.141 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
outside_diameter0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
style_designatorKEY
surface_treatmentPASSIVATE OVERALL
material_thickness0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
internal_key_quantity2
internal_straight_key_width0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
distance_from_centerline_to_top_of_internal_key0.067 INCHES NOMINAL IN
NSN5310-01-332-6514
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FTM 7008-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL STRAIGHT KEY WIDTH: 0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
•
DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY: 0.067 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: KEY
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
INTERNAL STRAIGHT KEY WIDTH0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY0.067 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORKEY
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
MATERIAL THICKNESS0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 631 OVERALL
INTERNAL KEY QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 1
868250-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FTM 7008-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FTM 7008-6?
FTM 7008-6 is a WASHER,KEY.
What parts can replace FTM 7008-6?
There is 1 known substitute for FTM 7008-6: 868250-2. Substitute compatibility should be verified for your specific system.
What is the NSN for FTM 7008-6?
FTM 7008-6 is cataloged in the U.S. Government catalog under NSN 5310-01-332-6514. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FTM 7008-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.