PartsTable
Technical Data Sheet
Download PDF

FTD7049HS8-8-27A — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FTD7049HS8-8-27A: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: PAN NO. 2, head_height: 0.164 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.270 INCHES MAXIMUM IN, thread_length: 1.395 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-688-2307, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FTD7049HS8-8-27A
NSN: 5305-01-688-2307
FSC: 5305 — Screws
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_stylePAN NO. 2
head_height0.164 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.270 INCHES MAXIMUM IN
thread_length1.395 INCHES NOMINAL IN
fastener_length1.645 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.1431 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
end_item_identification5840-01-669-5071
NSN5305-01-688-2307
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FTD7049HS8-8-27A · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.1431 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.164 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.645 INCHES NOMINAL IN
•
THREAD LENGTH: 1.395 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.1431 INCHES MAXIMUM IN
HEAD HEIGHT0.164 INCHES MAXIMUM IN
FASTENER LENGTH1.645 INCHES NOMINAL IN
THREAD LENGTH1.395 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTPASSIVATE OVERALL
MINIMUM TENSILE STRENGTH1470 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 1
FTD7049Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FTD7049HS8-8-27A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FTD7049HS8-8-27A?
FTD7049HS8-8-27A is a SCREW,CAP,SOCKET HEAD.
What parts can replace FTD7049HS8-8-27A?
There is 1 known substitute for FTD7049HS8-8-27A: FTD7049. Substitute compatibility should be verified for your specific system.
What is the NSN for FTD7049HS8-8-27A?
FTD7049HS8-8-27A is cataloged in the U.S. Government catalog under NSN 5305-01-688-2307. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FTD7049HS8-8-27A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.