PartsTable
Technical Data Sheet
Download PDF

FTD7028 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FTD7028: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: HEXAGON, key_length: 1.329 INCHES NOMINAL IN, head_height: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, head_length: 0.428 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-653-5919, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FTD7028
NSN: 5305-01-653-5919
NIINs: 016535919, 016809126, 016833338, 016880776, 016881834, 016881835, 016881836, 016881838, 016881839, 016882280, 016882283, 016882284, 016883538, 016987828, 017008319, 017008336, 017008375, 017008381, 017178803, 017241052
FSC: 5305 — Screws
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleHEXAGON
key_length1.329 INCHES NOMINAL IN
head_height0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
head_length0.428 INCHES NOMINAL IN
thread_class3A A
head_diameter0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
hole_diameter0.1250 INCHES NOMINAL IN
hole_quantity1
thread_length1.139 INCHES NOMINAL IN
screw_materialSTEEL
NSN5305-01-653-5919
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FTD7028 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.014 INCHES NOMINAL IN
•
THREAD LENGTH: 1.014 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.156 INCHES NOMINAL IN
HEAD HEIGHT0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
FASTENER LENGTH1.014 INCHES NOMINAL IN
THREAD LENGTH1.014 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 1
LN22000-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy FTD7028?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FTD7028?
FTD7028 is a SCREW,CAP,SOCKET HEAD.
What parts can replace FTD7028?
There is 1 known substitute for FTD7028: LN22000-15. Substitute compatibility should be verified for your specific system.
What is the NSN for FTD7028?
FTD7028 is cataloged in the U.S. Government catalog under NSN 5305-01-653-5919. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FTD7028

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.