PartsTable
Technical Data Sheet
Download PDF

FTD7017P-10-5-11 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FTD7017P-10-5-11: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.385 INCHES MAXIMUM IN, thread_length: 0.338 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN, screw_material: IRON ALLOY 660, fastener_length: 0.680 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-352-3563, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FTD7017P-10-5-11
NSN: 5305-01-352-3563
FSC: 5305 — Screws
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.385 INCHES MAXIMUM IN
thread_length0.338 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
screw_materialIRON ALLOY 660
fastener_length0.680 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
special_featuresKEYWAY
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentPASSIVATE
NSN5305-01-352-3563
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FTD7017P-10-5-11 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.680 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS5737 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.338 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: IRON ALLOY 660
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.680 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.338 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALIRON ALLOY 660
SPECIAL FEATURESKEYWAY
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
G450726-4Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FTD7017P-10-5-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FTD7017P-10-5-11?
FTD7017P-10-5-11 is a SCREW,MACHINE.
What parts can replace FTD7017P-10-5-11?
There is 1 known substitute for FTD7017P-10-5-11: G450726-4. Substitute compatibility should be verified for your specific system.
What is the NSN for FTD7017P-10-5-11?
FTD7017P-10-5-11 is cataloged in the U.S. Government catalog under NSN 5305-01-352-3563. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FTD7017P-10-5-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.