FTD7009P-6-7 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

FTD7009P-6-7: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.312 INCHES NOMINAL IN, fastener_length: 0.437 INCHES NOMINAL IN, special_features: FURNISHED WITH RETAINING RING P/N 868250-2. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-332-6670, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FTD7009P-6-7

NSN: 5305-01-332-6670
FSC: 5305 — Screws
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)

SPECIFICATIONS

head_style	FLAT COUNTERSUNK
thread_class	3A A
head_diameter	0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length	0.312 INCHES NOMINAL IN
fastener_length	0.437 INCHES NOMINAL IN
special_features	FURNISHED WITH RETAINING RING P/N 868250-2
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.138 INCHES IN
screw_surface_treatment	PASSIVATE
thread_quantity_per_inch	32
NSN	5305-01-332-6670

COMPONENT DIAGRAM

KEY FEATURES

•

SCREW SURFACE TREATMENT: PASSIVATE

•

FASTENER LENGTH: 0.437 INCHES NOMINAL IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES

•

THREAD LENGTH: 0.312 INCHES NOMINAL IN

•

NOMINAL THREAD DIAMETER: 0.138 INCHES IN

•

HEAD STYLE: FLAT COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385

TECHNICAL CHARACTERISTICS

SCREW SURFACE TREATMENT	PASSIVATE
FASTENER LENGTH	0.437 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
THREAD LENGTH	0.312 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER	0.138 INCHES IN
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
SPECIAL FEATURES	FURNISHED WITH RETAINING RING P/N 868250-2
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1

SUBSTITUTES & CROSS-REFERENCES 1

868250-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy FTD7009P-6-7?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FTD7009P-6-7?

FTD7009P-6-7 is a SCREW,MACHINE.

What parts can replace FTD7009P-6-7?

There is 1 known substitute for FTD7009P-6-7: 868250-1. Substitute compatibility should be verified for your specific system.

What is the NSN for FTD7009P-6-7?

FTD7009P-6-7 is cataloged in the U.S. Government catalog under NSN 5305-01-332-6670. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FTD7009P-6-7 — SCREW,MACHINE

Request a Quote — FTD7009P-6-7