PartsTable
Technical Data Sheet
Download PDF

FTC7761N06-5A — SCREW,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FTC7761N06-5A: SCREW,ASSEMBLED WASHER.

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING PRIMARY WASHER, head_style: FLAT CHAMFER, head_height: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, thread_length: 0.289 INCHES MINIMUM AND 0.319 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-686-8709, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FTC7761N06-5A
NSN: 5305-01-686-8709
FSC: 5305 — Screws
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING PRIMARY WASHER
head_styleFLAT CHAMFER
head_height0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
thread_length0.289 INCHES MINIMUM AND 0.319 INCHES MAXIMUM IN
fastener_length0.319 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.109 INCHES NOMINAL IN
internal_drive_styleHEXAGON
end_item_identification5840-01-669-5071
NSN5305-01-686-8709
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FTC7761N06-5A · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED WASHER THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.109 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.319 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OR AMS2700 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED WASHER DIAMETER: 0.262 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.289 INCHES MINIMUM AND 0.319 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 NATIONAL SPEC SINGLE MATERIAL RESPONSE OR AMS5737 NATIONAL SPEC SINGLE MATERIAL RESPONSE HEAD
TECHNICAL CHARACTERISTICS
EXTENDED WASHER THICKNESS0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.109 INCHES NOMINAL IN
HEAD HEIGHT0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
FASTENER LENGTH0.319 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OR AMS2700 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED WASHER DIAMETER0.262 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN
THREAD LENGTH0.289 INCHES MINIMUM AND 0.319 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5731 NATIONAL SPEC SINGLE MATERIAL RESPONSE OR AMS5737 NATIONAL SPEC SINGLE MATERIAL RESPONSE HEAD
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5731 NATIONAL SPEC SINGLE MATERIAL RESPONSE OR AMS5737 NATIONAL SPEC SINGLE MATERIAL RESPONSE THREADS
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A240 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE PRIMARY WASHER
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
FTC7761Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy FTC7761N06-5A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FTC7761N06-5A?
FTC7761N06-5A is a SCREW,ASSEMBLED WASHER.
What parts can replace FTC7761N06-5A?
There is 1 known substitute for FTC7761N06-5A: FTC7761. Substitute compatibility should be verified for your specific system.
What is the NSN for FTC7761N06-5A?
FTC7761N06-5A is cataloged in the U.S. Government catalog under NSN 5305-01-686-8709. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FTC7761N06-5A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.