PartsTable
Technical Data Sheet
Download PDF

FT5215-10-10 — INSERT,PANEL FASTENER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FT5215-10-10: INSERT,PANEL FASTENER.

The INSERT,PANEL FASTENER is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_type: THREADEDTHREADED, insert_style: FLUSH FLANGEFLUSH FLANGE, body_diameter: 0.350 INCHES NOMINAL0.350 INCHES NOMINAL IN, overall_length: 0.625 INCHES NOMINAL0.625 INCHES NOMINAL IN, flange_diameter: 0.368 INCHES MINIMUM AND 0.368 INCHES MINIMUM AND 0.378 INCHES MAXIMUM0.378 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5325-01-429-4922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FT5215-10-10
NSN: 5325-01-429-4922
FSC: 5325 — Fastening Devices
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_typeTHREADEDTHREADED
insert_styleFLUSH FLANGEFLUSH FLANGE
body_diameter0.350 INCHES NOMINAL0.350 INCHES NOMINAL IN
overall_length0.625 INCHES NOMINAL0.625 INCHES NOMINAL IN
flange_diameter0.368 INCHES MINIMUM AND 0.368 INCHES MINIMUM AND 0.378 INCHES MAXIMUM0.378 INCHES MAXIMUM IN
features_providedALL METAL LOCKING ELEMENTALL METAL LOCKING ELEMENT
shoulder_diameter0.350 INCHES MINIMUM AND 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM0.370 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
thread_size_and_series/type_designator0.190-32 UNIFIED NATIONAL JOINT FINE (UNJF)
surface_treatment_document_and_classificationQQ-P-416 TYPE2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5325-01-429-4922
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FT5215-10-10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 0.368 INCHES MINIMUM AND 0.368 INCHES MINIMUM AND 0.378 INCHES MAXIMUM0.378 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
FEATURES PROVIDED: ALL METAL LOCKING ELEMENTALL METAL LOCKING ELEMENT
•
BODY DIAMETER: 0.350 INCHES NOMINAL0.350 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
SHOULDER DIAMETER: 0.350 INCHES MINIMUM AND 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM0.370 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER0.368 INCHES MINIMUM AND 0.368 INCHES MINIMUM AND 0.378 INCHES MAXIMUM0.378 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH0.625 INCHES NOMINAL0.625 INCHES NOMINAL IN
FEATURES PROVIDEDALL METAL LOCKING ELEMENTALL METAL LOCKING ELEMENT
BODY DIAMETER0.350 INCHES NOMINAL0.350 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
SHOULDER DIAMETER0.350 INCHES MINIMUM AND 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM0.370 INCHES MAXIMUM IN
INSERT STYLEFLUSH FLANGEFLUSH FLANGE
MATERIALSTEEL CORROSION RESISTING OVERALL
OTHER ITEMS IN FSC 5325 — Fastening Devices
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5325-00-000-1884 5325-00-000-9988 5325-00-001-1567 5325-00-001-2043 5325-00-001-3842 5325-00-001-3858 5325-00-001-3871 5325-00-001-4317
SUBSTITUTES & CROSS-REFERENCES 4
80-007-10-3Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
K100G395-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FIT7623-3-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SL3149-3-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FT5215-10-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FT5215-10-10?
FT5215-10-10 is a INSERT,PANEL FASTENER.
What parts can replace FT5215-10-10?
There are 4 known substitutes for FT5215-10-10: 80-007-10-3, K100G395-10, FIT7623-3-10 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FT5215-10-10?
FT5215-10-10 is cataloged in the U.S. Government catalog under NSN 5325-01-429-4922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FT5215-10-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.