PartsTable
Technical Data Sheet
Download PDF

FT5195-10-8-3P — NUT,SELF-LOCKING,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

FT5195-10-8-3P: NUT,SELF-LOCKING,SPLINE.

The NUT,SELF-LOCKING,SPLINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1050 OR STEEL COMP 1075 NUT, nut_style: SPLINE (FLOATING), nut_height: 0.342 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN, nut_length: 0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN, pilot_length: 0.316 INCHES NOMINAL IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-279-2303, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FT5195-10-8-3P
NSN: 5310-01-279-2303
FSC: 5310 — Nuts and Washers
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 OR STEEL COMP 1075 NUT
nut_styleSPLINE (FLOATING)
nut_height0.342 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
nut_length0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
pilot_length0.316 INCHES NOMINAL IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
pilot_diameter0.264 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
features_providedFLOATING NUT
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5310-01-279-2303
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FT5195-10-8-3P · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5085 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A682 ASSN STD 2ND MATERIAL RESPONSE NUT
•
NUT COUNTERBORE DEPTH: 0.316 INCHES NOMINAL NUT IN
•
FEATURES PROVIDED: FLOATING NUT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS
NUT LENGTH0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5085 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A682 ASSN STD 2ND MATERIAL RESPONSE NUT
NUT COUNTERBORE DEPTH0.316 INCHES NOMINAL NUT IN
FEATURES PROVIDEDFLOATING NUT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
COUNTERBORE DIAMETER0.243 INCHES MINIMUM AND 0.250 INCHES MAXIMUM NUT IN
PILOT DIAMETER0.264 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
SL3469-3H3Reference document
Same NSN cross-reference
Reference document — Secondary reference
C7592A3H3Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
FGD6010-10-H-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy FT5195-10-8-3P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FT5195-10-8-3P?
FT5195-10-8-3P is a NUT,SELF-LOCKING,SPLINE.
What parts can replace FT5195-10-8-3P?
There are 3 known substitutes for FT5195-10-8-3P: SL3469-3H3, C7592A3H3, FGD6010-10-H-3. Substitute compatibility should be verified for your specific system.
What is the NSN for FT5195-10-8-3P?
FT5195-10-8-3P is cataloged in the U.S. Government catalog under NSN 5310-01-279-2303. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FT5195-10-8-3P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.