PartsTable
Technical Data Sheet
PartsTable / MRO / FT2300
FT2300 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: FIBERGLASS AND RUBBER ALL PLIES, body_style: W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS, body_length: 0.625 INCHES NOMINAL IN, wall_thickness: 0.090 INCHES NOMINAL IN, connection_type: SOFT FIRST END, inside_diameter: 0.880 INCHES NOMINAL FIRST END IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-045-8103, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ FT2300
NSN: 4720-00-045-8103
FSC: 4720
CAGE: 83144 — AUTOMATION INDUSTRIES INC FLEXIBLE TUBING DIV (USA)
SPECIFICATIONS
materialFIBERGLASS AND RUBBER ALL PLIES
body_styleW/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
body_length0.625 INCHES NOMINAL IN
wall_thickness0.090 INCHES NOMINAL IN
connection_typeSOFT FIRST END
inside_diameter0.880 INCHES NOMINAL FIRST END IN
terminal_length0.265 INCHES NOMINAL IN
connection_styleROUND FIRST END
style_designatorHELICALLY WOUND CONTINOUS WIRE SUPPORTED
features_providedSTOWAGE DEVICE
end_overall_length0.500 INCHES NOMINAL FIRST END IN
operating_pressure20.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
NSN4720-00-045-8103
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: FT2300 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL REINFORCING WIRE
•
MEASURING METHOD AND LENGTH: 4.500 INCHES NOMINAL OVERALL IN
•
STYLE DESIGNATOR: HELICALLY WOUND CONTINOUS WIRE SUPPORTED
•
OPERATING PRESSURE: 20.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
•
CONNECTION TYPE: SOFT FIRST END
•
END INSIDE DIAMETER: 0.880 INCHES NOMINAL FIRST END IN
•
FEATURES PROVIDED: STOWAGE DEVICE
•
CONNECTION STYLE: ROUND FIRST END
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL REINFORCING WIRE
MEASURING METHOD AND LENGTH4.500 INCHES NOMINAL OVERALL IN
STYLE DESIGNATORHELICALLY WOUND CONTINOUS WIRE SUPPORTED
OPERATING PRESSURE20.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
CONNECTION TYPESOFT FIRST END
END INSIDE DIAMETER0.880 INCHES NOMINAL FIRST END IN
FEATURES PROVIDEDSTOWAGE DEVICE
CONNECTION STYLEROUND FIRST END
MINIMUM INSIDE BENDING RADIUS0.880 INCHES IN
END OVERALL LENGTH0.500 INCHES NOMINAL FIRST END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
CF2Interchangeable
interchangeable cross-reference
interchangeable
0N151929Interchangeable
interchangeable cross-reference
interchangeable
357-000-X5U0-232AInterchangeable
interchangeable cross-reference
interchangeable
410142-1Interchangeable
interchangeable cross-reference
interchangeable
2DFH17232XABInterchangeable
interchangeable cross-reference
interchangeable
130067P1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FT2300?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FT2300?
FT2300 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace FT2300?
There are 8 known substitutes for FT2300: CF2, 0N151929, 357-000-X5U0-232A and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FT2300?
FT2300 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-045-8103. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FT2300

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026