PartsTable
Technical Data Sheet
Download PDF

FT1585-12 — WASHER,KEY

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

FT1585-12: WASHER,KEY.

The WASHER,KEY is a the manufacturer industrial component. Key specifications include material: STEEL COMP 631 OVERALL, hole_diameter: 0.311 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN, outside_diameter: 0.387 INCHES MINIMUM AND 0.393 INCHES MAXIMUM IN, special_features: SPLIT EXIST ALONG SUFACE, style_designator: KEY, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-433-8468, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FT1585-12
NSN: 5310-01-433-8468
FSC: 5310 — Nuts and Washers
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 631 OVERALL
hole_diameter0.311 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
outside_diameter0.387 INCHES MINIMUM AND 0.393 INCHES MAXIMUM IN
special_featuresSPLIT EXIST ALONG SUFACE
style_designatorKEY
surface_treatmentPASSIVATE OVERALL
material_thickness0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
internal_key_quantity2
internal_straight_key_width0.044 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
distance_from_centerline_to_top_of_internal_key0.080 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
NSN5310-01-433-8468
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FT1585-12 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL STRAIGHT KEY WIDTH: 0.044 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
•
DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY: 0.080 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: KEY
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.387 INCHES MINIMUM AND 0.393 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
INTERNAL STRAIGHT KEY WIDTH0.044 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY0.080 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORKEY
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.387 INCHES MINIMUM AND 0.393 INCHES MAXIMUM IN
MATERIAL THICKNESS0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
SPECIAL FEATURESSPLIT EXIST ALONG SUFACE
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 631 OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FT1585-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FT1585-12?
FT1585-12 is a WASHER,KEY.
What is the NSN for FT1585-12?
FT1585-12 is cataloged in the U.S. Government catalog under NSN 5310-01-433-8468. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FT1585-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.