FT1255HS-4-3-9 — SCREW ASSEMBLY,PANEL

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

FT1255HS-4-3-9: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 PLUS X OR STEEL COMP 303 OR STEEL COMP 303SE FASTENER, head_style: FLAT CHAMFER, head_height: 0.169 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, thread_length: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-352-2191, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FT1255HS-4-3-9

NSN: 5305-01-352-2191
FSC: 5305 — Screws
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)

SPECIFICATIONS

material	STEEL COMP 303 PLUS X OR STEEL COMP 303 OR STEEL COMP 303SE FASTENER
head_style	FLAT CHAMFER
head_height	0.169 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
thread_length	0.250 INCHES NOMINAL IN
fastener_length	0.542 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	ANODIZE STAND-OFF
width_across_flats	0.094 INCHES NOMINAL IN
internal_drive_style	HEXAGON
nominal_thread_diameter	0.112 INCHES IN
NSN	5305-01-352-2191

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.094 INCHES NOMINAL IN

•

HEAD HEIGHT: 0.169 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.542 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER

•

MATERIAL ACCOMMODATED THICKNESS: 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.250 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.094 INCHES NOMINAL IN
HEAD HEIGHT	0.169 INCHES MAXIMUM IN
FASTENER LENGTH	0.542 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TY1 CL2 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
MATERIAL ACCOMMODATED THICKNESS	0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
THREAD LENGTH	0.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
NOMINAL THREAD DIAMETER	0.112 INCHES IN
HEAD STYLE	FLAT CHAMFER

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 2

334057P01Reference document

Same NSN cross-reference

Reference document — Secondary reference

FT-1255-HS-4-3-PReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy FT1255HS-4-3-9?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FT1255HS-4-3-9?

FT1255HS-4-3-9 is a SCREW ASSEMBLY,PANEL.

What parts can replace FT1255HS-4-3-9?

There are 2 known substitutes for FT1255HS-4-3-9: 334057P01, FT-1255-HS-4-3-P. Substitute compatibility should be verified for your specific system.

What is the NSN for FT1255HS-4-3-9?

FT1255HS-4-3-9 is cataloged in the U.S. Government catalog under NSN 5305-01-352-2191. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FT1255HS-4-3-9 — SCREW ASSEMBLY,PANEL

Request a Quote — FT1255HS-4-3-9