FT1226-4 — SCREW ASSEMBLY,PANEL

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

FT1226-4: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 FASTENER, head_style: HEXAGON, head_height: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.369 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN, fastener_length: 1.772 INCHES MINIMUM AND 1.882 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-253-5918, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FT1226-4

NSN: 5305-01-253-5918
FSC: 5305 — Screws
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)

SPECIFICATIONS

material	STEEL COMP XM-13 FASTENER
head_style	HEXAGON
head_height	0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
thread_class	2A A
thread_length	0.369 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
fastener_length	1.772 INCHES MINIMUM AND 1.882 INCHES MAXIMUM IN
hardness_rating	35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM SPRING
special_features	POINT LENGTH 0.205MIN AND 0.235MAX
thread_direction	RIGHT-HAND
surface_treatment	PASSIVATE OVERALL
width_between_flats	0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
internal_drive_style	W/O INTERNAL DRIVE
NSN	5305-01-253-5918

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.772 INCHES MINIMUM AND 1.882 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD LENGTH: 0.369 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN

•

HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM PRIMARY WASHER

•

MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES PRIMARY WASHER

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
FASTENER LENGTH	1.772 INCHES MINIMUM AND 1.882 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH	0.369 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
HARDNESS RATING	35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM PRIMARY WASHER
HARDNESS RATING	35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM SPRING
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A313 ASSN STD ALL MATERIAL RESPONSES SPRING
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES SECONDARY WASHER

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES 1

587R107H02Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy FT1226-4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FT1226-4?

FT1226-4 is a SCREW ASSEMBLY,PANEL.

What parts can replace FT1226-4?

There is 1 known substitute for FT1226-4: 587R107H02. Substitute compatibility should be verified for your specific system.

What is the NSN for FT1226-4?

FT1226-4 is cataloged in the U.S. Government catalog under NSN 5305-01-253-5918. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FT1226-4 — SCREW ASSEMBLY,PANEL

Request a Quote — FT1226-4