PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FT01-0BB
FT01-0BB ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CIRCUIT CARD ASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL WASHER, alignment_type: RIGID, overall_height: 0.1875 INCHES NOMINAL IN, surface_finish: GROUND, style_designator: FLAT RACE SURFACE, STAGGERED BALL RETAINER, bore_smallest_diameter: 0.1875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9137, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FT01-0BB
NSN: 3110-00-155-9137
FSC: 3110
CAGE: 05469 — APPLIED INDUSTRIAL TECHNOLOGIES INC (USA)
SPECIFICATIONS
materialSTEEL WASHER
alignment_typeRIGID
overall_height0.1875 INCHES NOMINAL IN
surface_finishGROUND
style_designatorFLAT RACE SURFACE, STAGGERED BALL RETAINER
bore_smallest_diameter0.1875 INCHES NOMINAL IN
overall_outside_diameter0.4375 INCHES NOMINAL IN
standard_tolerance_designationABEC NO.1
thrust_directional_capability_designationSINGLE
NSN3110-00-155-9137
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FT01-0BB · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SMALLEST DIAMETER: 0.1875 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 0.4375 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OR STEEL CORROSION RESISTING RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
BORE SMALLEST DIAMETER0.1875 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.4375 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONABEC NO.1
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SURFACE FINISHGROUND
OVERALL HEIGHT0.1875 INCHES NOMINAL IN
MATERIALSTEEL OR STEEL CORROSION RESISTING RETAINER
MATERIALSTEEL WASHER
STYLE DESIGNATORFLAT RACE SURFACE, STAGGERED BALL RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
2140-0352Interchangeable
interchangeable cross-reference
interchangeable
11387-2Interchangeable
interchangeable cross-reference
interchangeable
A01Interchangeable
interchangeable cross-reference
interchangeable
SA1-30Interchangeable
interchangeable cross-reference
interchangeable
SA1Interchangeable
interchangeable cross-reference
interchangeable
1892344Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FT01-0BB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FT01-0BB?
FT01-0BB is a CIRCUIT CARD ASSEMBLY.
What parts can replace FT01-0BB?
There are 13 known substitutes for FT01-0BB: 2140-0352, 11387-2, A01 and 10 more. Substitute compatibility should be verified for your specific system.
Is FT01-0BB still available?
FT01-0BB is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FT01-0BB

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026