PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FT-4
FT-4 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, body_width: 3.312 INCHES NOMINAL IN, body_height: 2.000 INCHES NOMINAL IN, body_length: 1.625 INCHES NOMINAL IN, bore_diameter: 0.2500 INCHES NOMINAL IN, alignment_type: RIGID. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FT-4
NSN: 3110-00-155-9145
FSC: 3110
CAGE: 03489 — ANDREWS BEARING CORP DIV OF MPB CORP SUB OF WHEELABRATOR-FRYE INC (USA)
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
body_width3.312 INCHES NOMINAL IN
body_height2.000 INCHES NOMINAL IN
body_length1.625 INCHES NOMINAL IN
bore_diameter0.2500 INCHES NOMINAL IN
alignment_typeRIGID
inclosure_typeOPEN
overall_height0.5575 INCHES MINIMUM AND 0.5675 INCHES MAXIMUM IN
surface_finishGROUND
mounting_methodUNTHREADED HOLE(S) SINGLE GROUP
frequency_rating50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM SINGLE COMPONENT
special_featuresCHROME PLATED OD; CADMIUM ALL OTHER EXPOSED SURFACES
NSN3110-00-155-9145
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FT-4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT RACE SURFACE, STAGGERED BALL RETAINER
•
OVERALL OUTSIDE DIAMETER: 1.3436 INCHES MINIMUM AND 1.3438 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
BORE SMALLEST DIAMETER: 0.6915 INCHES MINIMUM AND 0.6935 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFLAT RACE SURFACE, STAGGERED BALL RETAINER
OVERALL OUTSIDE DIAMETER1.3436 INCHES MINIMUM AND 1.3438 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
BORE SMALLEST DIAMETER0.6915 INCHES MINIMUM AND 0.6935 INCHES MAXIMUM IN
OVERALL HEIGHT0.5575 INCHES MINIMUM AND 0.5675 INCHES MAXIMUM IN
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
5616Interchangeable
interchangeable cross-reference
interchangeable
5-686Interchangeable
interchangeable cross-reference
interchangeable
SIJ2-2472Interchangeable
interchangeable cross-reference
interchangeable
A2104Interchangeable
interchangeable cross-reference
interchangeable
HP8491B-OPT030Interchangeable
interchangeable cross-reference
interchangeable
18N-30Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FT-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FT-4?
FT-4 is a BEARING,ROLLER,NEEDLE.
What parts can replace FT-4?
There are 29 known substitutes for FT-4: 5616, 5-686, SIJ2-2472 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FT-4?
FT-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FT-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026