PartsTable
Technical Data Sheet
Download PDF

FT-1182HS-10-9AB — SCREW ASSEMBLY,PANEL

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FT-1182HS-10-9AB: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303SE STAND-OFF, head_style: FLAT CHAMFER, thread_class: 3A A, head_diameter: 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN, thread_length: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN, fastener_length: 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-397-3494, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FT-1182HS-10-9AB
NSN: 5305-01-397-3494
FSC: 5305 — Screws
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 303SE STAND-OFF
head_styleFLAT CHAMFER
thread_class3A A
head_diameter0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
thread_length0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
fastener_length0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentOXIDE FASTENER
width_across_flats0.156 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
NSN5305-01-397-3494
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FT-1182HS-10-9AB · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
•
THREAD LENGTH: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.156 INCHES NOMINAL IN
FASTENER LENGTH0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 CL2 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 CL2 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
THREAD LENGTH0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5640 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A484 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF
NOMINAL THREAD DIAMETER0.190 INCHES IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
7104576-001Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy FT-1182HS-10-9AB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FT-1182HS-10-9AB?
FT-1182HS-10-9AB is a SCREW ASSEMBLY,PANEL.
What parts can replace FT-1182HS-10-9AB?
There is 1 known substitute for FT-1182HS-10-9AB: 7104576-001. Substitute compatibility should be verified for your specific system.
What is the NSN for FT-1182HS-10-9AB?
FT-1182HS-10-9AB is cataloged in the U.S. Government catalog under NSN 5305-01-397-3494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FT-1182HS-10-9AB

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.