PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FT-11710
FT-11710 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE,AIR DUCT is a the manufacturer industrial component. Key specifications include material: STEEL REINFORCING WIRE, wall_thickness: 0.060 INCHES NOMINAL IN, connection_type: PREFORMED BOTH ENDS, inside_diameter: 5.000 INCHES NOMINAL FIRST END IN, connection_style: ROUND BOTH ENDS, special_features: TWO RETAINING CLAMPS INCLUDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-009-5263, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FT-11710
NSN: 4720-00-009-5263
FSC: 4720
CAGE: 30299 — FLEXIBLE TECHNOLOGIES INC (USA)
SPECIFICATIONS
materialSTEEL REINFORCING WIRE
wall_thickness0.060 INCHES NOMINAL IN
connection_typePREFORMED BOTH ENDS
inside_diameter5.000 INCHES NOMINAL FIRST END IN
connection_styleROUND BOTH ENDS
special_featuresTWO RETAINING CLAMPS INCLUDED
style_designatorFULLY CONVOLUTED W/ WIRE RINGS BETWEEN CONVOLUTIONS
features_providedTHERMAL INSULATED
end_overall_length2.000 INCHES NOMINAL BOTH ENDS IN
operating_pressure3.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
end_inside_diameter4.500 INCHES NOMINAL BOTH ENDS IN
cross-sectional_shape_styleROUND
NSN4720-00-009-5263
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: FT-11710 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WALL THICKNESS: 0.060 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FULLY CONVOLUTED W/ WIRE RINGS BETWEEN CONVOLUTIONS
•
OPERATING PRESSURE: 3.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
•
MEASURING METHOD AND LENGTH: 180.000 INCHES NOMINAL OVERALL IN
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY THE INCLUDED CLAMPS
•
MATERIAL: STEEL REINFORCING WIRE
•
NONDEFINITIVE SPEC/STD DATA: D SIZE
TECHNICAL CHARACTERISTICS (FLIS)
WALL THICKNESS0.060 INCHES NOMINAL IN
STYLE DESIGNATORFULLY CONVOLUTED W/ WIRE RINGS BETWEEN CONVOLUTIONS
OPERATING PRESSURE3.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
MEASURING METHOD AND LENGTH180.000 INCHES NOMINAL OVERALL IN
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY THE INCLUDED CLAMPS
SPECIAL FEATURESTWO RETAINING CLAMPS INCLUDED
MATERIALSTEEL REINFORCING WIRE
NONDEFINITIVE SPEC/STD DATAD SIZE
CROSS-SECTIONAL SHAPE STYLEROUND
MATERIALRUBBER SYNTHETIC FIRST PLY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
AS38386C2D030HInterchangeable
interchangeable cross-reference
interchangeable
MIL-D-38386Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS38386Interchangeable
interchangeable cross-reference
interchangeable
FT1443-2Interchangeable
interchangeable cross-reference
interchangeable
AS38386C2D007LInterchangeable
interchangeable cross-reference
interchangeable
AS38386C2D004HInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FT-11710?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FT-11710?
FT-11710 is a HOSE,AIR DUCT.
What parts can replace FT-11710?
There are 23 known substitutes for FT-11710: AS38386C2D030H, MIL-D-38386, SAE-AS38386 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FT-11710?
FT-11710 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-009-5263. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FT-11710

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026