PartsTable
Technical Data Sheet
Download PDF

FT-1095 — BOLT,INTERNAL WRENCHING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FT-1095: BOLT,INTERNAL WRENCHING.

The BOLT,INTERNAL WRENCHING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OVERALL, head_height: 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, thread_length: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, fastener_length: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-209-7893, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FT-1095
NSN: 5306-01-209-7893
NIINs: 012097893, 016640883
FSC: 5306 — Bolts
CAGE: 58794 — FASTENER TECHNOLOGY CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OVERALL
head_height0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
thread_length0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
fastener_length0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.086 INCHES IN
first_diameter_from_head0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
NSN5306-01-209-7893
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FT-1095 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
FIRST DIAMETER FROM HEAD: 0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
HEAD HEIGHT0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
FASTENER LENGTH0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
FIRST DIAMETER FROM HEAD0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
THREAD DIRECTIONRIGHT-HAND
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.215 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
850729-0001Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FT-1095?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FT-1095?
FT-1095 is a BOLT,INTERNAL WRENCHING.
What parts can replace FT-1095?
There is 1 known substitute for FT-1095: 850729-0001. Substitute compatibility should be verified for your specific system.
What is the NSN for FT-1095?
FT-1095 is cataloged in the U.S. Government catalog under NSN 5306-01-209-7893. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FT-1095

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.