PartsTable
Technical Data Sheet
Download PDF

FS97101-0903 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FS97101-0903: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, construction: SOLIDSOLID, overall_length: 17.500 INCHES MINIMUM AND 17.500 INCHES MINIMUM AND 18.000 INCHES MAXIMUM18.000 INCHES MAXIMUM IN, style_designator: STRIP, fabrication_method: SOLIDSOLID, cross-sectional_width: 0.891 INCHES MINIMUM AND 0.891 INCHES MINIMUM AND 0.985 INCHES MAXIMUM0.985 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-122-8530, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FS97101-0903
NSN: 5330-01-122-8530
FSC: 5330 — Packing and Gasket Materials
CAGE: 77969 — RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. DBA RUBBERCRAFT CORP (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
constructionSOLIDSOLID
overall_length17.500 INCHES MINIMUM AND 17.500 INCHES MINIMUM AND 18.000 INCHES MAXIMUM18.000 INCHES MAXIMUM IN
style_designatorSTRIP
fabrication_methodSOLIDSOLID
cross-sectional_width0.891 INCHES MINIMUM AND 0.891 INCHES MINIMUM AND 0.985 INCHES MAXIMUM0.985 INCHES MAXIMUM IN
cross-sectional_height0.293 INCHES MINIMUM AND 0.293 INCHES MINIMUM AND 0.333 INCHES MAXIMUM0.333 INCHES MAXIMUM IN
cross-sectional_thickness0.032 INCHES NOMINAL0.032 INCHES NOMINAL IN
cross-sectional_shape_styleHOLLOW BULBHOLLOW BULB
cross_section_inside_diameter0.249 INCHES NOMINAL0.249 INCHES NOMINAL IN
material_document_and_classificationMIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-122-8530
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FS97101-0903 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.032 INCHES NOMINAL0.032 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.293 INCHES MINIMUM AND 0.293 INCHES MINIMUM AND 0.333 INCHES MAXIMUM0.333 INCHES MAXIMUM IN
•
CROSS-SECTIONAL WIDTH: 0.891 INCHES MINIMUM AND 0.891 INCHES MINIMUM AND 0.985 INCHES MAXIMUM0.985 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: HOLLOW BULBHOLLOW BULB
•
CROSS SECTION INSIDE DIAMETER: 0.249 INCHES NOMINAL0.249 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.032 INCHES NOMINAL0.032 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.293 INCHES MINIMUM AND 0.293 INCHES MINIMUM AND 0.333 INCHES MAXIMUM0.333 INCHES MAXIMUM IN
CROSS-SECTIONAL WIDTH0.891 INCHES MINIMUM AND 0.891 INCHES MINIMUM AND 0.985 INCHES MAXIMUM0.985 INCHES MAXIMUM IN
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH17.500 INCHES MINIMUM AND 17.500 INCHES MINIMUM AND 18.000 INCHES MAXIMUM18.000 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEHOLLOW BULBHOLLOW BULB
CROSS SECTION INSIDE DIAMETER0.249 INCHES NOMINAL0.249 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
FABRICATION METHODSOLIDSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy FS97101-0903?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FS97101-0903?
FS97101-0903 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What is the NSN for FS97101-0903?
FS97101-0903 is cataloged in the U.S. Government catalog under NSN 5330-01-122-8530. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FS97101-0903

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.