PartsTable
Technical Data Sheet
Download PDF

FS2003-6-707C — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FS2003-6-707C: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.670 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN, thread_length: 0.221 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING OR STEEL, fastener_length: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-438-3553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FS2003-6-707C
NSN: 5305-00-438-3553
FSC: 5305 — Screws
CAGE: 58998 — FASTENER INNOVATION TECHNOLOGY, INC. DBA F I T (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.670 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
thread_length0.221 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING OR STEEL
fastener_length0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.375 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-438-3553
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FS2003-6-707C · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
•
THREAD LENGTH: 0.221 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
THREAD LENGTH0.221 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 3C STYLE
SCREW MATERIALSTEEL CORROSION RESISTING OR STEEL
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 8
E125-707Reference document
Same NSN cross-reference
Reference document — Secondary reference
PBF1068-707CReference document
Same NSN cross-reference
Reference document — Secondary reference
106751-6-707CReference document
Same NSN cross-reference
Reference document — Secondary reference
FFS92Reference document
Same NSN cross-reference
Reference document — Identification reference
9145-707Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS24693-C338Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FS2003-6-707C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FS2003-6-707C?
FS2003-6-707C is a SCREW,MACHINE.
What parts can replace FS2003-6-707C?
There are 8 known substitutes for FS2003-6-707C: E125-707, PBF1068-707C, 106751-6-707C and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FS2003-6-707C?
FS2003-6-707C is cataloged in the U.S. Government catalog under NSN 5305-00-438-3553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FS2003-6-707C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.