PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FS017-1PC160
FS017-1PC160 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.300 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN, pin_overall_diameter: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.010 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-011-0407, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FS017-1PC160
NSN: 5315-00-011-0407
FSC: 5315
CAGE: 88080 — COOPER CAMERON CORP COOPER BESSEMER RECIPROCATING PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length0.300 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN
pin_overall_diameter0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES NOMINAL IN
material_document_and_classificationQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-011-0407
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FS017-1PC160 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 0.300 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL DIAMETER0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
PIN OVERALL LENGTH0.300 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
1104-07Interchangeable
interchangeable cross-reference
interchangeable
TH315-101Interchangeable
interchangeable cross-reference
interchangeable
2N-11040-07Interchangeable
interchangeable cross-reference
interchangeable
3279474Interchangeable
interchangeable cross-reference
interchangeable
184-0404-030Interchangeable
interchangeable cross-reference
interchangeable
T495X107K010ASInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FS017-1PC160?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FS017-1PC160?
FS017-1PC160 is a PIN,STRAIGHT,HEADLESS.
What parts can replace FS017-1PC160?
There are 17 known substitutes for FS017-1PC160: 1104-07, TH315-101, 2N-11040-07 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FS017-1PC160?
FS017-1PC160 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-011-0407. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FS017-1PC160

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026