PartsTable
Technical Data Sheet

FS-1200-3/4 E/G — HANGER,PIPE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FS-1200-3/4 E/G: HANGER,PIPE.

The HANGER,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL, style_designator: SPLIT RING, surface_treatment: ZINC, pipe_accommodation_diameter: 0.750 INCHES NOMINAL IN, supported_item_and_quantity: 1 PIPE, material_document_and_classification: QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-785-7511, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FS-1200-3/4 E/G
NSN: 5340-00-785-7511
FSC: 5340 — Hardware, Commercial
CAGE: 15892 — POWER-STRUT VAN HUFFEL TUBE CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL
style_designatorSPLIT RING
surface_treatmentZINC
pipe_accommodation_diameter0.750 INCHES NOMINAL IN
supported_item_and_quantity1 PIPE
material_document_and_classificationQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-785-7511
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FS-1200-3/4 E/G MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT RING
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE
•
SURFACE TREATMENT: ZINC
•
SUPPORTED ITEM AND QUANTITY: 1 PIPE
•
PIPE ACCOMMODATION DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSPLIT RING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE
SURFACE TREATMENTZINC
SUPPORTED ITEM AND QUANTITY1 PIPE
PIPE ACCOMMODATION DIAMETER0.750 INCHES NOMINAL IN
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
10015529-008Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FS-1200-3/4 E/G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FS-1200-3/4 E/G?
FS-1200-3/4 E/G is a HANGER,PIPE.
What parts can replace FS-1200-3/4 E/G?
There is 1 known substitute for FS-1200-3/4 E/G: 10015529-008. Substitute compatibility should be verified for your specific system.
What is the NSN for FS-1200-3/4 E/G?
FS-1200-3/4 E/G is cataloged in the U.S. Government catalog under NSN 5340-00-785-7511. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FS-1200-3/4 E/G