FRSS7500-8-B-7 — SCREW ASSEMBLY,PANEL

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

FRSS7500-8-B-7: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 FASTENER, head_style: KNURLED NO. 2, head_height: 0.495 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.420 INCHES NOMINAL IN, thread_length: 0.375 INCHES MINIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-258-9116, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FRSS7500-8-B-7

NSN: 5305-01-258-9116
FSC: 5305 — Screws
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)

SPECIFICATIONS

material	STEEL COMP 303 FASTENER
head_style	KNURLED NO. 2
head_height	0.495 INCHES NOMINAL IN
thread_class	2A A
head_diameter	0.420 INCHES NOMINAL IN
thread_length	0.375 INCHES MINIMUM IN
fastener_length	0.932 INCHES NOMINAL IN
thread_direction	RIGHT-HAND
surface_treatment	PASSIVATE FASTENER
internal_drive_style	SLOT
nominal_thread_diameter	0.164 INCHES IN
thread_quantity_per_inch	32
NSN	5305-01-258-9116

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.495 INCHES NOMINAL IN

•

FASTENER LENGTH: 0.932 INCHES NOMINAL IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.495 INCHES NOMINAL IN
FASTENER LENGTH	0.932 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TY1 CL1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
MATERIAL ACCOMMODATED THICKNESS	0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
THREAD LENGTH	0.375 INCHES MINIMUM IN

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES 4

FT1300-8-2-7Reference document

Same NSN cross-reference

Reference document — Secondary reference

11438307-123Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

11438307-23Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

FRSS7500-8-B-7DLSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy FRSS7500-8-B-7?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FRSS7500-8-B-7?

FRSS7500-8-B-7 is a SCREW ASSEMBLY,PANEL.

What parts can replace FRSS7500-8-B-7?

There are 4 known substitutes for FRSS7500-8-B-7: FT1300-8-2-7, 11438307-123, 11438307-23 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for FRSS7500-8-B-7?

FRSS7500-8-B-7 is cataloged in the U.S. Government catalog under NSN 5305-01-258-9116. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FRSS7500-8-B-7 — SCREW ASSEMBLY,PANEL

Request a Quote — FRSS7500-8-B-7