PartsTable
Technical Data Sheet
Download PDF

FRS7500-8-B-6 — SCREW ASSEMBLY,PANEL

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FRS7500-8-B-6: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 BEARING SURFACE OF HEAD, head_style: KNURLED NO. 5, head_height: 0.495 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.420 INCHES NOMINAL IN, thread_length: 0.187 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-323-7945, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FRS7500-8-B-6
NSN: 5305-01-323-7945
FSC: 5305 — Screws
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 BEARING SURFACE OF HEAD
head_styleKNURLED NO. 5
head_height0.495 INCHES NOMINAL IN
thread_class2A A
head_diameter0.420 INCHES NOMINAL IN
thread_length0.187 INCHES NOMINAL IN
fastener_length0.802 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN
special_featuresTWO WASHERS
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
NSN5305-01-323-7945
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FRS7500-8-B-6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.495 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.802 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL ACCOMMODATED THICKNESS: 0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.187 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: KNURLED NO. 5
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.495 INCHES NOMINAL IN
FASTENER LENGTH0.802 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL ACCOMMODATED THICKNESS0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
THREAD LENGTH0.187 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEKNURLED NO. 5
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURESTWO WASHERS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
CS9004S-08-7-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
720285-67Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
FT1058-8-2-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FRS7500-8-B-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FRS7500-8-B-6?
FRS7500-8-B-6 is a SCREW ASSEMBLY,PANEL.
What parts can replace FRS7500-8-B-6?
There are 3 known substitutes for FRS7500-8-B-6: CS9004S-08-7-3, 720285-67, FT1058-8-2-6. Substitute compatibility should be verified for your specific system.
What is the NSN for FRS7500-8-B-6?
FRS7500-8-B-6 is cataloged in the U.S. Government catalog under NSN 5305-01-323-7945. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FRS7500-8-B-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.