FRPH7500-10C3 — STUD ASSEMBLY,TURNLOCK FASTENER

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

FRPH7500-10C3: STUD ASSEMBLY,TURNLOCK FASTENER.

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include material: STEEL COMP 301 WASHER, drive_type: CROSS RECESS, eyelet_length: 0.777 INCHES NOMINAL IN, surface_treatment: PASSIVATE WASHER, securing_device_type: WASHER, eyelet_outside_diameter: 0.297 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-548-6884, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FRPH7500-10C3

NSN: 5325-00-548-6884
FSC: 5325 — Fastening Devices
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)

SPECIFICATIONS

material	STEEL COMP 301 WASHER
drive_type	CROSS RECESS
eyelet_length	0.777 INCHES NOMINAL IN
surface_treatment	PASSIVATE WASHER
securing_device_type	WASHER
eyelet_outside_diameter	0.297 INCHES NOMINAL IN
material_accommodated_thickness	0.313 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
material_document_and_classification	QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
stud_thread_size_and_series/type_designator	0.190-32 UNF
surface_treatment_document_and_classification	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE WASHER
distance_from_engaging_member_to_largest_bearing_surface_of_head	1.082 INCHES NOMINAL IN
NSN	5325-00-548-6884

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE WASHER

•

EYELET OUTSIDE DIAMETER: 0.297 INCHES NOMINAL IN

•

DRIVE TYPE: CROSS RECESS

•

MATERIAL ACCOMMODATED THICKNESS: 0.313 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING

TECHNICAL CHARACTERISTICS

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STUD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE EJECTOR SPRING
EYELET OUTSIDE DIAMETER	0.297 INCHES NOMINAL IN
DRIVE TYPE	CROSS RECESS
MATERIAL ACCOMMODATED THICKNESS	0.313 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE WASHER
SECURING DEVICE TYPE	WASHER
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD	1.082 INCHES NOMINAL IN

OTHER ITEMS IN FSC 5325 — Fastening Devices

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5325-00-000-1884 5325-00-000-9988 5325-00-001-1567 5325-00-001-2043 5325-00-001-3842 5325-00-001-3858 5325-00-001-3871 5325-00-001-4317

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy FRPH7500-10C3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FRPH7500-10C3?

FRPH7500-10C3 is a STUD ASSEMBLY,TURNLOCK FASTENER.

What is the NSN for FRPH7500-10C3?

FRPH7500-10C3 is cataloged in the U.S. Government catalog under NSN 5325-00-548-6884. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FRPH7500-10C3 — STUD ASSEMBLY,TURNLOCK FASTENER

Request a Quote — FRPH7500-10C3