PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FRD1 3-4
FRD1 3-4 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.7500 INCHES NOMINAL IN, overall_width: 2.3750 INCHES NOMINAL IN, alignment_type: RIGID, special_features: OIL HOLE AND GROOVE IN INNER AND OUTER RACE, overall_outside_diameter: 2.7500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7696, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FRD1 3-4
NSN: 3110-00-108-7696
FSC: 3110
CAGE: 39317 — MCGILL MANUFACTURING COMPANY INC USE CAGE CODE 92563 FOR CATALOGING. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.7500 INCHES NOMINAL IN
overall_width2.3750 INCHES NOMINAL IN
alignment_typeRIGID
special_featuresOIL HOLE AND GROOVE IN INNER AND OUTER RACE
overall_outside_diameter2.7500 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-108-7696
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FRD1 3-4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 2.7500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SPECIAL FEATURESOIL HOLE AND GROOVE IN INNER AND OUTER RACE
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER2.7500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL WIDTH2.3750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
5128Interchangeable
interchangeable cross-reference
interchangeable
RD14Interchangeable
interchangeable cross-reference
interchangeable
RL20S393GInterchangeable
interchangeable cross-reference
interchangeable
RLR20C393GRInterchangeable
interchangeable cross-reference
interchangeable
C5-39KPORM5PCTInterchangeable
interchangeable cross-reference
interchangeable
22HS794Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FRD1 3-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FRD1 3-4?
FRD1 3-4 is a BEARING,ROLLER,NEEDLE.
What parts can replace FRD1 3-4?
There are 8 known substitutes for FRD1 3-4: 5128, RD14, RL20S393G and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FRD1 3-4?
FRD1 3-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7696. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FRD1 3-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026