FRBWW7500-12-B-5 — SCREW ASSEMBLY,PANEL

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

FRBWW7500-12-B-5: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1050 SECONDARY WASHER, head_style: KNURLED NO. 1, head_height: 0.530 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.531 INCHES NOMINAL IN, fastener_length: 0.622 INCHES MINIMUM AND 0.632 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-256-4471, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FRBWW7500-12-B-5

NSN: 5305-01-256-4471
FSC: 5305 — Screws
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)

SPECIFICATIONS

material	STEEL COMP 1050 SECONDARY WASHER
head_style	KNURLED NO. 1
head_height	0.530 INCHES NOMINAL IN
thread_class	3A A
head_diameter	0.531 INCHES NOMINAL IN
fastener_length	0.622 INCHES MINIMUM AND 0.632 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	ANODIZE HEAD
internal_drive_style	SLOT
end_item_identification	DEFENSE SUPPORT PROGRAM
nominal_thread_diameter	0.250 INCHES IN
thread_quantity_per_inch	28
NSN	5305-01-256-4471

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.530 INCHES NOMINAL IN

•

FASTENER LENGTH: 0.622 INCHES MINIMUM AND 0.632 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.530 INCHES NOMINAL IN
FASTENER LENGTH	0.622 INCHES MINIMUM AND 0.632 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
MATERIAL ACCOMMODATED THICKNESS	0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES 2

482148-109Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

FT1200-12-2-5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy FRBWW7500-12-B-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FRBWW7500-12-B-5?

FRBWW7500-12-B-5 is a SCREW ASSEMBLY,PANEL.

What parts can replace FRBWW7500-12-B-5?

There are 2 known substitutes for FRBWW7500-12-B-5: 482148-109, FT1200-12-2-5. Substitute compatibility should be verified for your specific system.

What is the NSN for FRBWW7500-12-B-5?

FRBWW7500-12-B-5 is cataloged in the U.S. Government catalog under NSN 5305-01-256-4471. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FRBWW7500-12-B-5 — SCREW ASSEMBLY,PANEL

Request a Quote — FRBWW7500-12-B-5