FRAS7500-10-B-4 — SCREW ASSEMBLY,PANEL

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

FRAS7500-10-B-4: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 PRIMARY WASHER, head_style: FLAT CHAMFER, head_height: 0.675 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.451 INCHES NOMINAL IN, thread_length: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-212-4558, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FRAS7500-10-B-4

NSN: 5305-01-212-4558
FSC: 5305 — Screws
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)

SPECIFICATIONS

material	STEEL COMP 301 PRIMARY WASHER
head_style	FLAT CHAMFER
head_height	0.675 INCHES NOMINAL IN
thread_class	3A A
head_diameter	0.451 INCHES NOMINAL IN
thread_length	0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
fastener_length	1.362 INCHES MINIMUM AND 1.397 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	PASSIVATE OVERALL
internal_drive_style	SLOT
nominal_thread_diameter	0.190 INCHES IN
thread_quantity_per_inch	32
NSN	5305-01-212-4558

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.675 INCHES NOMINAL IN

•

FASTENER LENGTH: 1.362 INCHES MINIMUM AND 1.397 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL ACCOMMODATED THICKNESS: 0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.675 INCHES NOMINAL IN
FASTENER LENGTH	1.362 INCHES MINIMUM AND 1.397 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL ACCOMMODATED THICKNESS	0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
THREAD LENGTH	0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL DOCUMENT AND CLASSIFICATION	ASTMA493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER

SUBSTITUTES & CROSS-REFERENCES 1

F7500-10-B-4Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy FRAS7500-10-B-4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FRAS7500-10-B-4?

FRAS7500-10-B-4 is a SCREW ASSEMBLY,PANEL.

What parts can replace FRAS7500-10-B-4?

There is 1 known substitute for FRAS7500-10-B-4: F7500-10-B-4. Substitute compatibility should be verified for your specific system.

What is the NSN for FRAS7500-10-B-4?

FRAS7500-10-B-4 is cataloged in the U.S. Government catalog under NSN 5305-01-212-4558. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FRAS7500-10-B-4 — SCREW ASSEMBLY,PANEL

Request a Quote — FRAS7500-10-B-4