FR10-9 — BEARING,PLAIN,ROD END

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

FR10-9: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include shank_style: INTERNALLY THREADED W/ HEXAGON END, thread_class: 2B, bore_diameter: 0.6245 INCHES MINIMUM AND 0.6275 INCHES MAXIMUM IN, overall_length: 2.1870 INCHES NOMINAL IN, thread_diameter: 0.625 INCHES NOMINAL IN, style_designator: BALL TYPE. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-132-6953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FR10-9

NSN: 3120-00-132-6953
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 57448 — STEPHENS-ADAMSON INC A SUB OF ALLIS-CHALMERS CORP (USA)

SPECIFICATIONS

shank_style	INTERNALLY THREADED W/ HEXAGON END
thread_class	2B
bore_diameter	0.6245 INCHES MINIMUM AND 0.6275 INCHES MAXIMUM IN
overall_length	2.1870 INCHES NOMINAL IN
thread_diameter	0.625 INCHES NOMINAL IN
style_designator	BALL TYPE
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM ROD END BODY
inner_member_width	0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN
outer_member_width	0.5570 INCHES MINIMUM AND 0.5670 INCHES MAXIMUM IN
shank_thread_length	1.4370 INCHES NOMINAL IN
thread_quantity_per_inch	18
NSN	3120-00-132-6953

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK THREAD LENGTH: 1.4370 INCHES NOMINAL IN

•

BORE CENTER TO SHANK END DISTANCE: 1.4270 INCHES MINIMUM AND 1.4470 INCHES MAXIMUM IN

•

INNER MEMBER WIDTH: 0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN

•

OUTER MEMBER WIDTH: 0.5570 INCHES MINIMUM AND 0.5670 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: BALL TYPE

•

THREAD DIAMETER: 0.625 INCHES NOMINAL IN

•

SHANK WIDTH ACROSS WRENCH FLATS: 0.8120 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SHANK THREAD LENGTH	1.4370 INCHES NOMINAL IN
BORE CENTER TO SHANK END DISTANCE	1.4270 INCHES MINIMUM AND 1.4470 INCHES MAXIMUM IN
INNER MEMBER WIDTH	0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN
OUTER MEMBER WIDTH	0.5570 INCHES MINIMUM AND 0.5670 INCHES MAXIMUM IN
STYLE DESIGNATOR	BALL TYPE
THREAD DIAMETER	0.625 INCHES NOMINAL IN
OVERALL LENGTH	2.1870 INCHES NOMINAL IN
SHANK WIDTH ACROSS WRENCH FLATS	0.8120 INCHES NOMINAL IN
THREAD DIRECTION	RIGHT-HAND
SHANK STYLE	INTERNALLY THREADED W/ HEXAGON END

SUBSTITUTES & CROSS-REFERENCES 2

HF-10Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

3018142-4Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy FR10-9?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FR10-9?

FR10-9 is a BEARING,PLAIN,ROD END.

What parts can replace FR10-9?

There are 2 known substitutes for FR10-9: HF-10, 3018142-4. Substitute compatibility should be verified for your specific system.

What is the NSN for FR10-9?

FR10-9 is cataloged in the U.S. Government catalog under NSN 3120-00-132-6953. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FR10-9 — BEARING,PLAIN,ROD END

Request a Quote — FR10-9