PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FPAA14058A1407
FPAA14058A1407 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,FUSIBLE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CASING, usage_location: INSIDE, size_designation: 1/8 INCH IN, core_fusing_temp_rating: 283.0 DEG FAHRENHEIT, thread_size_and_series/type_designator: 1/8-27 NPT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-493-3719, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FPAA14058A1407
NSN: 5340-00-493-3719
FSC: 5340
CAGE: 31645 — GOODRICH CORPORATION DBA GOODRICH CORP, A NEW YORK CORP (USA)
SPECIFICATIONS
materialCOPPER ALLOY CASING
usage_locationINSIDE
size_designation1/8 INCH IN
core_fusing_temp_rating283.0 DEG FAHRENHEIT
thread_size_and_series/type_designator1/8-27 NPT
NSN5340-00-493-3719
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FPAA14058A1407 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1/8-27 NPT
•
SIZE DESIGNATION: 1/8 INCH IN
•
USAGE LOCATION: INSIDE
•
CORE FUSING TEMP RATING: 283.0 DEG FAHRENHEIT
•
MATERIAL: COPPER ALLOY CASING
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SIZE AND SERIES/TYPE DESIGNATOR1/8-27 NPT
SIZE DESIGNATION1/8 INCH IN
USAGE LOCATIONINSIDE
CORE FUSING TEMP RATING283.0 DEG FAHRENHEIT
MATERIALCOPPER ALLOY CASING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
13229E6163Interchangeable
interchangeable cross-reference
interchangeable
A14058Interchangeable
interchangeable cross-reference
interchangeable
FPA290Interchangeable
interchangeable cross-reference
interchangeable
14058Interchangeable
interchangeable cross-reference
interchangeable
FPA1-8 14058Interchangeable
Same NIIN cross-reference
interchangeable
001-900024Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FPAA14058A1407?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FPAA14058A1407?
FPAA14058A1407 is a PLUG,FUSIBLE.
What parts can replace FPAA14058A1407?
There are 6 known substitutes for FPAA14058A1407: 13229E6163, A14058, FPA290 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FPAA14058A1407?
FPAA14058A1407 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-493-3719. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FPAA14058A1407

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026