PartsTable
Technical Data Sheet
Download PDF

FP42-2-TOO-5602 J — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FP42-2-TOO-5602 J: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: CORK OVERALL, outside_diameter: 7.500 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 6.875 INCHES NOMINAL IN, cross-sectional_thickness: 0.250 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-646-6896, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FP42-2-TOO-5602 J
NSN: 5330-00-646-6896
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialCORK OVERALL
outside_diameter7.500 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter6.875 INCHES NOMINAL IN
cross-sectional_thickness0.250 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-646-6896
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FP42-2-TOO-5602 J MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 7.500 INCHES NOMINAL IN
•
APERTURE DIAMETER: 6.875 INCHES NOMINAL IN
•
MATERIAL: CORK OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.250 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER7.500 INCHES NOMINAL IN
APERTURE DIAMETER6.875 INCHES NOMINAL IN
MATERIALCORK OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
117899Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FP42-2-TOO-5602 J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FP42-2-TOO-5602 J?
FP42-2-TOO-5602 J is a GASKET.
What parts can replace FP42-2-TOO-5602 J?
There is 1 known substitute for FP42-2-TOO-5602 J: 117899. Substitute compatibility should be verified for your specific system.
What is the NSN for FP42-2-TOO-5602 J?
FP42-2-TOO-5602 J is cataloged in the U.S. Government catalog under NSN 5330-00-646-6896. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FP42-2-TOO-5602 J