PartsTable
Technical Data Sheet
Download PDF

FP-8-10 — PLUG,PROTECTIVE,DUST AND MOISTUR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FP-8-10: PLUG,PROTECTIVE,DUST AND MOISTUR.

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: PLASTIC, POLYETHYLENE (PP), drive_type: HEX HEAD, design_type: THREADED, overall_diameter: 1.115 INCHES NOMINAL IN, tube_outside_diameter_for_which_designed: 0.625 INCHES NOMINAL IN, connector_nominal_thread_size_for_which_designed: 0.875 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-657-9463, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FP-8-10
NSN: 5340-01-657-9463
FSC: 5340 — Hardware, Commercial
CAGE: 0FTB8 — POLYMER MOLDING INC (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
drive_typeHEX HEAD
design_typeTHREADED
overall_diameter1.115 INCHES NOMINAL IN
tube_outside_diameter_for_which_designed0.625 INCHES NOMINAL IN
connector_nominal_thread_size_for_which_designed0.875 INCHES IN
NSN5340-01-657-9463
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FP-8-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
OVERALL DIAMETER: 1.115 INCHES NOMINAL IN
•
DRIVE TYPE: HEX HEAD
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.625 INCHES NOMINAL IN
•
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED: 0.875 INCHES IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
TECHNICAL CHARACTERISTICS
DESIGN TYPETHREADED
OVERALL DIAMETER1.115 INCHES NOMINAL IN
DRIVE TYPEHEX HEAD
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.625 INCHES NOMINAL IN
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED0.875 INCHES IN
MATERIALPLASTIC, POLYETHYLENE (PP)
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy FP-8-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FP-8-10?
FP-8-10 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What is the NSN for FP-8-10?
FP-8-10 is cataloged in the U.S. Government catalog under NSN 5340-01-657-9463. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FP-8-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.