PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FORM1 1.25INODX1INIDX1INLG
FORM1 1.25INODX1INIDX1INLG ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The FORM1 1.25INODX1INIDX1INLG is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-927-7027, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FORM1 1.25INODX1INIDX1INLG
NSN: 3120-00-927-7027
FSC: 3120
CAGE: 0B4R0 — CONNEX, INC. (USA)
SPECIFICATIONS
Part NumberFORM1 1.25INODX1INIDX1INLG
NSN3120-00-927-7027
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: FORM1 1.25INODX1INIDX1INLG · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
MATERIAL: PLASTIC OVERALL
•
BODY OUTSIDE DIAMETER: 1.2480 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
•
BODY INSIDE DIAMETER: 1.0000 INCHES MINIMUM AND 1.0030 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
TECHNICAL CHARACTERISTICS (FLIS)
CORNER SHAPESQUARE ALL CORNERS
MATERIALPLASTIC OVERALL
OVERALL LENGTH1.0000 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER1.2480 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
BODY INSIDE DIAMETER1.0000 INCHES MINIMUM AND 1.0030 INCHES MAXIMUM IN
SPECIAL FEATURESMATL IS REPROCESSED POLYTETRAFLUOROETHYLENE WITH GLASS FILLER
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
144243Interchangeable
interchangeable cross-reference
interchangeable
104038Interchangeable
interchangeable cross-reference
interchangeable
FORM1 1.25INODX1INDX1INLGInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FORM1 1.25INODX1INIDX1INLG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FORM1 1.25INODX1INIDX1INLG?
FORM1 1.25INODX1INIDX1INLG is a FORM1 1.25INODX1INIDX1INLG.
What parts can replace FORM1 1.25INODX1INIDX1INLG?
There are 3 known substitutes for FORM1 1.25INODX1INIDX1INLG: 144243, 104038, FORM1 1.25INODX1INDX1INLG. Substitute compatibility should be verified for your specific system.
What is the NSN for FORM1 1.25INODX1INIDX1INLG?
FORM1 1.25INODX1INIDX1INLG is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-927-7027. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FORM1 1.25INODX1INIDX1INLG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026