PartsTable
Technical Data Sheet
Download PDF

FN-632-5 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

FN-632-5: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.172 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), pilot_diameter: 0.197 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-978-3478, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FN-632-5
NSN: 5310-00-978-3478
FSC: 5310 — Nuts and Washers
CAGE: 46384 — PENN ENGINEERING & MANUFACTURING CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.172 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.197 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_across_flats0.250 INCHES NOMINAL IN
nominal_thread_size0.138 INCHES IN
thread_quantity_per_inch32
NSN5310-00-978-3478
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FN-632-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
PILOT DIAMETER: 0.197 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.172 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
•
NUT STYLE: CLINCH
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
PILOT DIAMETER0.197 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
NUT HEIGHT0.172 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
NUT STYLECLINCH
THREAD CLASS2B
THREAD QUANTITY PER INCH32
MATERIALSTEEL COMP 303 OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
NCN6-1-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS3214-26Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
413864-9Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy FN-632-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FN-632-5?
FN-632-5 is a NUT,PLAIN,CLINCH.
What parts can replace FN-632-5?
There are 3 known substitutes for FN-632-5: NCN6-1-6, MS3214-26, 413864-9. Substitute compatibility should be verified for your specific system.
What is the NSN for FN-632-5?
FN-632-5 is cataloged in the U.S. Government catalog under NSN 5310-00-978-3478. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FN-632-5