PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FL3C6-3
FL3C6-3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,FAIRLEAD is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, bore_diameter: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN, groove_radius: 0.1600 INCHES NOMINAL IN, groove_diameter: 0.7550 INCHES NOMINAL IN, inner_ring_width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, outer_ring_width: 0.4100 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-105-5251, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FL3C6-3
NSN: 3110-00-105-5251
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
bore_diameter0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
groove_radius0.1600 INCHES NOMINAL IN
seal_quantity2
groove_diameter0.7550 INCHES NOMINAL IN
inner_ring_width0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
outer_ring_width0.4100 INCHES NOMINAL IN
special_featuresLOW TORQUE PERFORMANCE
style_designatorSINGLE ROW RIGID, GROOVED OD INNER RING EXTENDED BOTH SIDES
bearing_seal_typeCONTACT
lubrication_materialLUBRICANT DRY FILM
overall_outside_diameter1.0150 INCHES MINIMUM AND 1.0250 INCHES MAXIMUM IN
NSN3110-00-105-5251
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FL3C6-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROOVE DIAMETER: 0.7550 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.4100 INCHES NOMINAL IN
•
INNER RING WIDTH: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
GROOVE RADIUS: 0.1600 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: LUBRICANT DRY FILM
•
BORE DIAMETER: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
•
SEAL QUANTITY: 2
•
OVERALL OUTSIDE DIAMETER: 1.0150 INCHES MINIMUM AND 1.0250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
GROOVE DIAMETER0.7550 INCHES NOMINAL IN
OUTER RING WIDTH0.4100 INCHES NOMINAL IN
INNER RING WIDTH0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
GROOVE RADIUS0.1600 INCHES NOMINAL IN
LUBRICATION MATERIALLUBRICANT DRY FILM
BORE DIAMETER0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
SEAL QUANTITY2
OVERALL OUTSIDE DIAMETER1.0150 INCHES MINIMUM AND 1.0250 INCHES MAXIMUM IN
MATERIALPLASTIC POLYAMIDE NYLON OUTER RING
MATERIALRUBBER SYNTHETIC SEAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
AW7Interchangeable
interchangeable cross-reference
interchangeable
7/32Interchangeable
interchangeable cross-reference
interchangeable
1940719Interchangeable
interchangeable cross-reference
interchangeable
6801-1ELAInterchangeable
interchangeable cross-reference
interchangeable
6801-1Interchangeable
interchangeable cross-reference
interchangeable
PC201AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FL3C6-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FL3C6-3?
FL3C6-3 is a BEARING,BALL,FAIRLEAD.
What parts can replace FL3C6-3?
There are 13 known substitutes for FL3C6-3: AW7, 7/32, 1940719 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FL3C6-3?
FL3C6-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-105-5251. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FL3C6-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026