FL200ALS2: RIVET,BLIND.
The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 SLEEVE, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN, lubrication: DRY FILM OR PARAFFIN WAX, shank_style: THREADED SELF-PLUGGING SHANK W/SLEEVE, shank_diameter: 0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5320-00-124-2000, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | IRON ALLOY 660 SLEEVE |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN |
| lubrication | DRY FILM OR PARAFFIN WAX |
| shank_style | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| shank_diameter | 0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN |
| fastener_length | 0.213 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN |
| hardness_rating | 30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM NUT |
| expansion_device | SERRATED STEM-TYPE W |
| special_features | NOT TO BE USED WHERE TEMPERATURE EXCEEDS 1200 DEG F DEGF |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| surface_treatment | PASSIVATE NUT |
| NSN | 5320-00-124-2000 |
| SHANK DIAMETER | 0.200 INCHES NOMINAL IN |
| EXPANSION DEVICE | THREADED MANDREL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| GRIP LENGTH | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN |
| SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| SPECIAL FEATURES | NOT TO BE USED WHERE TEMPERATURE EXCEEDS 1200 DEG F DEGF |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MATERIAL | STEEL OVERALL |
| HEAD MAJOR DIAMETER | 0.342 INCHES MINIMUM IN |
No substitute or cross-reference records for this part.