PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FJ3052-1012S
FJ3052-1012S ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The ADAPTER,STRAIGHT,TUBE TO HOSE is a the manufacturer industrial component. Key specifications include shaft_type: ROUND SINGLE ACTUATOR, shaft_length: 0.938 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2B SINGLE MOUNTING FACILITY, overall_width: 2.750 INCHES NOMINAL IN, pole_quantity: 2 EACH SECTION FRONT, terminal_type: TAB, SOLDER LUG. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-593-3750, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FJ3052-1012S
NSN: 4730-01-593-3750
FSC: 4730
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
shaft_typeROUND SINGLE ACTUATOR
shaft_length0.938 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2B SINGLE MOUNTING FACILITY
overall_width2.750 INCHES NOMINAL IN
pole_quantity2 EACH SECTION FRONT
terminal_typeTAB, SOLDER LUG
overall_height2.750 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity24 EACH SECTION FRONT
inside_diameter0.760 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S) SINGLE MOUNTING FACILITY
outside_diameter1.000 INCHES NOMINAL IN
NSN4730-01-593-3750
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: FJ3052-1012S · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
10-01322Interchangeable
interchangeable cross-reference
interchangeable
216-01840-2Interchangeable
interchangeable cross-reference
interchangeable
5331PL1934123Interchangeable
interchangeable cross-reference
interchangeable
S000073Interchangeable
interchangeable cross-reference
interchangeable
FJ3052-0606SInterchangeable
interchangeable cross-reference
interchangeable
1001320Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FJ3052-1012S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FJ3052-1012S?
FJ3052-1012S is a ADAPTER,STRAIGHT,TUBE TO HOSE.
What parts can replace FJ3052-1012S?
There are 14 known substitutes for FJ3052-1012S: 10-01322, 216-01840-2, 5331PL1934123 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FJ3052-1012S?
FJ3052-1012S is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-593-3750. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FJ3052-1012S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026