PartsTable
Technical Data Sheet
Download PDF

FIT01-0003-4010 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FIT01-0003-4010: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, head_style: OVAL COUNTERSUNK, grip_length: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.355 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-197-1385, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FIT01-0003-4010
NSN: 5305-01-197-1385
FSC: 5305 — Screws
CAGE: 58998 — FASTENER INNOVATION TECHNOLOGY, INC. DBA F I T (USA)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
head_styleOVAL COUNTERSUNK
grip_length0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.355 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN
thread_length0.516 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES GRIP
fastener_length1.151 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN
special_featuresTHREE KEYWAYS MACHINED IN BODY OF SCREW 0.040 TO 0.044 INCH WIDE 120 DEGREE EQUA-DISTANCE FROM ONE ANOTHER WITH A PLUG HOLE IN THE THREADED END IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
NSN5305-01-197-1385
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FIT01-0003-4010 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
WIDTH ACROSS FLATS: 0.157 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.151 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.516 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH32.0 MICROINCHES GRIP
WIDTH ACROSS FLATS0.157 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
FASTENER LENGTH1.151 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.516 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEOVAL COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
LE111-0003-4010Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy FIT01-0003-4010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FIT01-0003-4010?
FIT01-0003-4010 is a SCREW,CLOSE TOLERANCE.
What parts can replace FIT01-0003-4010?
There is 1 known substitute for FIT01-0003-4010: LE111-0003-4010. Substitute compatibility should be verified for your specific system.
What is the NSN for FIT01-0003-4010?
FIT01-0003-4010 is cataloged in the U.S. Government catalog under NSN 5305-01-197-1385. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FIT01-0003-4010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.