PartsTable
Technical Data Sheet
Download PDF

FIT 7101-2 — SCREW,EXTERNALLY RELIEVED BODY

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FIT 7101-2: SCREW,EXTERNALLY RELIEVED BODY.

The SCREW,EXTERNALLY RELIEVED BODY is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 0.122 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN, fastener_length: 0.274 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-266-9833, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FIT 7101-2
NSN: 5305-01-266-9833
FSC: 5305 — Screws
CAGE: 58998 — FASTENER INNOVATION TECHNOLOGY, INC. DBA F I T (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length0.122 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
fastener_length0.274 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
first_diameter_from_head0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-01-266-9833
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FIT 7101-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.274 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.122 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
•
FIRST DIAMETER FROM HEAD: 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
FASTENER LENGTH0.274 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.122 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
FIRST DIAMETER FROM HEAD0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.132 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY1
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
8502582-2Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
FT 1554-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FIT 7101-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FIT 7101-2?
FIT 7101-2 is a SCREW,EXTERNALLY RELIEVED BODY.
What parts can replace FIT 7101-2?
There are 2 known substitutes for FIT 7101-2: 8502582-2, FT 1554-2. Substitute compatibility should be verified for your specific system.
What is the NSN for FIT 7101-2?
FIT 7101-2 is cataloged in the U.S. Government catalog under NSN 5305-01-266-9833. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FIT 7101-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.